How to Build a Soapbox Kart: A Guide for First-Time Teams

Thinking of entering a kart in the Farndon Soapbox Derby, or any soapbox race? This guide walks you through building a gravity kart that’s fast, safe and fun, and that will pass scrutineering on race day. It’s based on our own rules, so for Farndon always check the full kart specification and rules before you build.

1. Start with the rules

A soapbox kart is powered by gravity alone: no motors, no pedals, no batteries or other stored energy, and no sails. At Farndon, karts must fit inside 3 metres long and 1.5 metres wide, with nothing sticking out beyond those dimensions. They can have between 3 and 6 wheels, with or without suspension, and no added ballast. Karts carry one driver and, optionally, one passenger, both seated and facing forward.

2. Build a strong chassis

The chassis takes every bump, jump and corner, three times over on race day. We strongly recommend a metal-based chassis, and encourage recycled materials for the bodywork where possible. Keep the weight low and central for stability, and make sure every joint is properly welded or bolted. Build it well, so it lasts all three heats.

3. Choose the right wheels

Wheels must have inflatable tyres. Any diameter is allowed as long as the kart stays within the maximum dimensions. Good bearings make a big difference to speed, and solid axle mounts stop wheels wobbling on the jumps.

4. Steering that really steers

Your kart needs effective steering to get round the curves and the chicane. Steering with your feet or with ropes isn’t allowed. A padded steering wheel or handlebar is recommended. Test the turning circle before race day, and check nothing binds at full lock.

5. Brakes come first

Working brakes acting on two wheels on the same axle are compulsory, and they must work repeatedly through all three heats. You must be able to stop on the course, and in the stop zone after the finish line. Build them from robust materials and test them at speed before you arrive.

6. Safe, secure bodywork

  • No exposed sharp corners or edges.
  • No materials that could shatter on impact.
  • Everything securely fixed: anything likely to fall off will be removed.
  • Covers fixed to the chassis must be safe and secure on inspection.
  • No live fire or flares.
  • Leave room to display your race number.

7. Give it a theme

Be wacky, but family-friendly! The crowd loves imaginative, colourful karts, and there’s a prize for the most creative kart and team, voted for by the competitors. Sponsors’ logos on your kart can help with your fundraising too. If your kart has raced at Farndon before, give it a new theme.

8. Kit for the driver and passenger

Everyone in the kart must wear a hard-shell, full-face helmet with a secured chinstrap (cycle helmets aren’t accepted), gloves, and clothing that covers their arms and legs. Elbow and knee pads are advised.

9. Test, then test again

There’s no practice run on race day, so do your testing beforehand on a safe, closed slope. Check brakes, steering and every fixing after each run. On the day, every kart is checked by scrutineers, and you must pass to race.

Ready to race?

The 2027 Farndon Soapbox Derby is on Sunday 12 September 2027. Read the full rules on Enter a Kart, follow us on social media for when entries open, and set up your team’s JustGiving page to raise money for the Hospice of the Good Shepherd.